Nanlux Matrix 2500C Kit

Nanlux Matrix 2500C Kit

The Nanlux Matrix 2500C is a 2500W full-color multi-source spotlight built for high-end film, television, commercial production and large-scale lighting arrays. Like the Matrix 2500B, it uses a four-head integrated design, but adds a full-color engine for productions that need wide color control, accurate skin tones and strong saturation.

Nebula C8 color engine and output

The Matrix 2500C runs on the NANLUX Nebula C8 Color Light Engine, which combines deep red, red, amber, lime, green, cyan, blue and indigo LEDs. As a result, the fixture reaches an ultra-wide CCT range of 1000K to 20,000K, with green/magenta adjustment of +/-200 across the full range. This color engine delivers better skin tone reproduction, a broader color gamut and stronger saturation through advanced color mixing.

The fixture offers seven lighting modes: CCT, HSI, HSIW, RGBW, XY Coordinates, Gel and Effect. Without the Fresnel, it delivers 9570 lux at 3m at 5600K. With the included FL-MT25 Motorized Fresnel Lens, however, output reaches 67,900 lux at 3m at 5600K with a 16 degree beam angle. The FL-MT25 also gives precise remote beam control from 16 to 48 degrees, so operators can adjust the beam even in difficult or high mounting positions.

Building dense multi-light arrays

Riggers can use the Matrix 2500C to build dense multi-light arrays. Its compact 40x40cm footprint lets them mount multiple fixtures close together, which creates a more continuous spread and higher light density. For example, four Matrix fixtures can form a 10,000W lighting array when paired with the optional NANLUX four-light frame. Riggers can also mount multiple arrays on truss systems and combine them into a larger modular lighting matrix.

Rugged housing and cooling

A one-piece magnesium alloy housing gives the fixture an IP66 rating, so it holds up to rain, heat and dust in demanding outdoor use. In addition, the front-to-rear airflow design reduces heat build-up in dense arrays and keeps performance stable under continuous high-load operation. Four fan modes, Smart, Full Speed, Low Speed and Off, let operators match cooling to the situation.

Control and connectivity

The Matrix 2500C supports on-board control, remote controller, wired controller, NANLINK App, DMX/RDM, LumenRadio CRMX, Art-Net/sACN and NFC. NFC allows batch configuration of DMX parameters across multiple fixtures, which speeds up setup on larger arrays. Because operators can control each lamp head individually in DMX setups, the fixture also suits advanced productions and virtual production workflows.

Key specifications:

• Rated power: 2500W
• Input voltage/current: AC100-240V / 50-60Hz / 28A
• CCT: 1000K-20,000K, G/M +/-200
• CRI: average 98
• TLCI: average 98
• TM-30 Rf: average 96
• TM-30 Rg: average 100
• SSI: 3200K: 86 / 5600K: 78
• Dimming: 0.0%-100.0%, in 0.1% increments
• Light fixture size: 399 x 399 x 234mm
• Light fixture weight: 18.07 kg
• Yoke weight: 2.25 kg
• FL-MT25 weight: 4.04 kg
• Standard kit carton size: 630 x 575 x 560mm

What’s in the box:

• Matrix 2500C x 1
• Yoke x 1
• FL-MT25 Motorized Fresnel Lens x 1
• AC Power Cable 7.5 m x 1
• User Manual x 1